- SS304/316/304L/316L ( CF8/CF8M/CF3/CF3M), WCB, WCC, LCB,LCC,WC6,WC9, C5,C12, etc.
- Swing type
Cast Steel Flange Ends Swing Type Check Valve(API/DIN)
1. Design & Manufacture standard: BS1868/EN14341.
2. Pressure & Temperature standard: ASME B16.34/DIN2401.
3. Face to face dimension standard: ASME B16.10/EN558.
4. Flange standard: ASME B 16.5, ASME B16.47/EN1092.
5. Test & Inspect standard: API 598/EN12266.
1. Bolted Bonnet and Pressure Seal
2. Swing Type
3. Horizontal or Vertical lines
4. Welded Seat
5. Renewable Seat Rings
6. Full Open Disc
SS304/316/304L/316L ( CF8/CF8M/CF3/CF3M), WCB, WCC, LCB,LCC,WC6,WC9, C5,C12, etc.
ISO9001 & CE, TS
RF, RTJ, FF, FM, Weld, etc.
-20~425℃, or according to customer requirements for different industry.
Water, Natural Gas, Oil and some corrosive liquid
100% quality tested before delivery
Standard Exporting Plywood Case
Exw, FOB, CFR, CIF, etc.
T/T, B/L, D/A, D/P, etc.
30% prepayment, 70% balance paid before shipping or against copy of BL
18 month after shipments
Sample available by RST VALVE
Check valve allows flow in one direction and automatically prevents back flow (reverse flow) when fluid in the line reverses direction. They are one of the few self-automated valves that do not require assistance to open and close. While some can be fitted with externally weighted and dampened devices for special circumstances, the majority do not have any outside assistance, such as that found with on/off or other valves. Unlike other valves, they continue to work even if the plant facility loses air, electricity, or the human being that might manually cycle them.